产品中心您现在的位置:首页 > 产品展示 > > BECKHOFF倍福 > BECKHOFF KL9400电源模块KL9400倍福

电源模块KL9400倍福

更新时间:2018-03-18

简要描述:

电源模块KL9400倍福
24电源
上海勇控自动化提供。库存充足,*。

电源模块KL9400倍福

倍福公司致力于为您实现基于 PC 控制技术的开放式自动化系统。我们的产品范围包括工业 PC、现场总线组件、驱动技术和自动化软件。这些产品线既可作为独立的组件来使用,也可将它们集成到一个完整的控制系统中,适用于各种行业领域。Beckhoff 公司始终坚持“自动化新技术”作为公司的发展理念,其自动化解决方案,如 CNC 机床控制和智能楼宇等,已在世界各地得到广泛应用。

 

BECKHOFF编码器模块KL5001

BECKHOFF编码器模块KL5001

:文工
:  
:zhiyong542701
:

CX9000-N030Embedded PCInterface module for 2 x RS232 connections (COM1 + COM2)
– full 115 kbaud on both channels
– electrically isolated interfaces (optically isolated)
– COM1: RXD, TXD, RTS, CTS
– COM2: RXD, TXD, RTS, CTS
– pre-assembled ex factory, cannot be upgraded
– protection class IP 20
– operating/storage temperature: 0 °C ... +55 °C/-25 °C ... +85 °C
– weight approx. 80 g
– dimensions (W x H x D) 19 x 100 x 51 mm
CX9000-N031Embedded PCInterface module for 2 x RS422/RS485 connections optically isolated (COM1 + COM2)
– full 115 kbaud on both channels
– electrically isolated interfaces (optically isolated)
– modes: RS485: with/without echo, with/without termination, RS422: full duplex
– COM1: RXD, TXD, RTS, CTS
– COM2: RXD, TXD, RTS, CTS
– may not be used at the same time with CX9000-N030
– pre-assembled ex factory, cannot be upgraded
– protection class IP 20
– operating/storage temperature: 0 °C ... +55 °C/-25 °C ... +85 °C
– weight approx. 80 g
– dimensions (W x H x D) 19 x 100 x 51 mm
CX9000-N070Embedded PCExtension module for 4 USB ports
– 4 x USB 2.0 ports type A, current output max. 500 mA
– suppports USB 1.1 and USB 2.0 standard
– transfer rates: 1.5 Mbit/s, 12 Mbit/s and 480 Mbit/s
– for field assembly
– protection class IP 20
– operating/storage temperature: 0°C ... +55°C/-25°C ... +85°C
– weight: ca. 80 g
– dimensions (W x H x D): 19 x 100 x 51 mm
CX9000-A001Embedded PCExtension module for usage of a mass storage Compact Flash card
– Compact Flash card slot for cards type I and II
– front LED indicators for: PWR (power), LOCK (card inserted) and CF (access)
– protection class IP 20
– operating/storage temperature: 0 °C ... +55 °C/-25 °C ... +85 °C
– weight approx. 80 g (without CF card)
– dimensions (W x H x D) 19 x 100 x 51 mm
CX9010Embedded PCModular DIN rail Industrial PC
– 533 MHz In® IXP420 CPU with XScale® technology
– 32 MB internal flash memory (bootable, not expandable)
– 128 MB internal RAM (not expandable)
– 128 kb non-volatile RAM (NOVRAM)
– clock: internal battery-backed clock for time and date, exchangeable battery
– two RJ45 Ethernet connector 10/100 Mbit (integrated switch)
– diagnostics LED: Power, LAN1 Link/Act, LAN2 Link/Act,
   K-bus Run/Err resp. L/A (EtherCAT Link/Act), and HDD access
– I/O interface: K-bus or E-bus
– operating system: Microsoft Windows CE
– max. power loss: 7 W (including CX901x-xxxx system interfaces)
– protection class IP 20
– operating/storage temperature 0 °C ... +55 °C/-25 °C ... +85 °C
– weight approx. 250 g
– dimensions (W x H x D) 59 x 100 x 91 mm

– 'U' = placeholder for the direct I/O interface type:
                0 =       on-board E-bus (Beckhoff EtherCAT Bus Terminals) interface
                1 =       on-board K-bus (Beckhoff Bus Terminals) interface


– 'C' = placeholder for the system interface connector options:
            0 =  preequipped with CX9010-N000 = 2 x Ethernet RJ45 connector (internal switch) + battery compartment
            1 =  preequipped with CX9010-N000 = 2 x Ethernet RJ45 connector (internal switch) + battery compartment
                                             + CX9010-N010 = DVI connector and 2 x USB port connectors


– 'T' = placeholder for the TwinCAT software level options:
                0 =        no TwinCAT software installed
                1 =        preequipped with TwinCAT 2 PLC licence
                2 =        preequipped with TwinCAT 2 NC licence
      

Please refer to the following table listing for the order numbers of the various valid combinations.
 
CX9010-0000Embedded PCBasic CPU module CX9010, E-bus, no TwinCAT

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7
上海勇控自动化设备有限公司

上海勇控自动化设备有限公司

工厂地址:上海市宝山区

©2024 版权所有:上海勇控自动化设备有限公司  备案号:沪ICP备17010722号-2  总访问量:327005  站点地图  技术支持:化工仪器网  管理登陆